Norton Commando MKIII Heavy Duty Electric Starter Motor

Heavy Duty Electric Starter Motor for Norton Commando

New replacement motor for the original Prestolite/Norton Starter

Features:

• Four brush, high driving torque motor
• Ball bearings for efficient/easy spinning
• O-ring sealed motor for gas and water exclusion
• Nine-tooth pinion provides a 15.78 gear reduction ratio for an 11% improvement in torque over the ten-tooth stock, prestolite with 14.2 gear reduction ratio
• Spins the engine with VIGOR! Very noticeable/significant increase in cranking speed
• Net weight 2.16 kg,  Approximately 2 pounds lighter than stock unit
• A bolt-on interchange...NO MODS REQUIRED!
  

Notes:

• We highly recommend changing your current starter cable to the heavy-duty 6 gauge cable kit (part number 06-5909/10/11/L)
• If you are using a Boyer ignition system on your Norton, we have found electric starters draw too much current for the Boyer to work properly.  We would recommend changing back to a points system, or a DIGITAL electronic ignition system like a Tri-Spark or Pazon electronic ignition system.  The Lucas RITA system will work, but is no longer manufactured.
• If you have preexisting problems or defects with your starter mechanism, a new starter motor will only make these issues more apparent.